木工加工棚直接關系到施工的防護，對加工棚的定期檢測關重要。更不用說工地上用的是木工加工棚，現在只是人流量大的地方。干燥的建筑物需要加工棚。施工現場加工棚是每個施工現場不可缺少的加工棚。在我們的生活中，工地加工棚在工地中起著舉足輕重的作用，所以我們要注意工地加工棚是否完工，工地加工棚是否牢固。

The processing shed on the construction site is directly related to the protection of the construction, and is crucial to the regular detection of the processing shed. Not to mention that the woodworking shed is used on the construction site. Now it is just a place with a large flow of people. Dry buildings need processing sheds. The processing shed at the construction site is an indispensable processing shed at each construction site. In our life, the site processing shed plays an important role in the construction site, so we should pay attention to whether the site processing shed is completed and whether the site processing shed is firm.

先檢查加工棚腳手板是否松動、懸垂。同時，定期檢查加工棚四角是否用鐵絲扎牢。發現問題及時修復，防止隱患。

First, check whether the scaffold board of the processing shed is loose and hanging. At the same time, regularly check whether the four corners of the processing shed are fastened with iron wire. Timely repair problems found to prevent hidden dangers.

定期檢查加工棚的隔離設施、外協網、懸挑網、外擋板、欄桿、接地防雷設施等，確保設施齊全、牢固、功能正常。如有損壞，應及時更換。加工棚如有松動，應及時緊固。如發現加工棚松動，應及時連接洞口。同時，加工棚施工中應注意以下規定：

Regularly check the isolation facilities, outsourcing network, cantilever network, outer baffle, railing, grounding and lightning protection facilities of the processing shed to ensure that the facilities are complete, secure and functional. If it is damaged, it shall be replaced in time. If the processing shed is loose, it shall be fastened in time. If the processing shed is found to be loose, the hole shall be connected in time. At the same time, the following provisions shall be noted during the construction of the processing shed:

(1)加工棚應設有防護罩、分配器、防護擋板等裝置；

(1) The processing shed shall be equipped with protective cover, distributor, protective baffle and other devices;

(2)加工棚安裝完畢后，按規定辦理驗收手續，并由責任人簽字確認；

(2) After the installation of the processing shed, the acceptance procedures shall be handled according to the provisions and signed by the responsible person for confirmation;

(3)不得使用同一電機驅動的多功能木工機床；

(3) Multi functional woodworking machines driven by the same motor shall not be used;

(4)加工棚按規定設置操作棚，并具有防雨等功能；

(4) The processing shed shall be equipped with an operation shed as required and shall be rain proof;

(5)施工時應單獨設置保護零線，并安裝漏電保護裝置。

(5) During construction, the protective neutral line shall be set separately and the leakage protection device shall be installed.

如何確定木工加工棚是否危險，我們可以從以上幾個方面進行檢查，施工現場的加工棚是施工中不可缺少的，平時購買時要注意其加工棚的耐久性，好的加工棚能給我們帶來更好的防護！更多相關內容就來我們網站http://www.retraactit.com進行咨詢吧！

How to determine whether the woodworking shed is dangerous? We can check from the above aspects. The processing shed at the construction site is indispensable in the construction. Pay attention to the durability of the processing shed when you buy it at ordinary times. A good processing shed can bring us better protection! More relevant content will come to our website http://www.retraactit.com Consult!