加工棚主要是應用在建筑工地上，像配電箱、鋼筋、電梯、木工、攪拌機等都需要加工棚，是一種建筑工地上的防護措施。它的使用可以說是備受關注的，那么該加工棚的防護作用怎么樣呢？

Processing shed is mainly used in construction sites, such as power distribution box, reinforcement, elevator, carpentry, mixer and so on. It is a protective and safety measure on construction sites. Its use can be said to have attracted much attention, so what is the protective effect of the processing shed?

加工棚是為了保護施工現場的施工人員，以鋼管為支撐架，用竹簽或竹條或廢棄模板覆蓋防砸，或通過加工棚保護高壓線等.一般的雙層保護是為了增加系數。

The processing shed is designed to protect the construction personnel on the construction site. The steel pipe is used as the support frame, covered with bamboo sticks or strips or waste formwork to prevent smashing, or the high-voltage line is protected through the processing shed The general double-layer protection is to increase the safety factor.

加工棚是施工時需要搭建的操作人員或人行通道，過往人員的加工棚需要雙層。在懸臂式腳手架上，每隔十米設置一個懸臂式視頻屏幕兜網，可以更好地保證人們在加工棚下行走的。在施工過程中，加工棚的施工需要注意防護措施，施工人員需要按施工要求進行施工。特別是在露天攪拌機場所、現場混凝土攪拌機、絞車棚、鋼棚、木棚、一些出入口、現場廁所等，需要設置加工棚。

The processing shed is an operator or pedestrian passage that needs to be built during construction. The processing shed of passing personnel needs to be double-layer. On the cantilever scaffold, a cantilever video screen pocket net is set every ten meters, which can better ensure the safety of people walking under the processing shed. During the construction process, the construction of the processing shed needs to pay attention to safety protection measures, and the construction personnel need to carry out the construction according to the construction requirements. Especially in the open-air mixing airport, on-site concrete mixer, winch shed, steel shed, wood shed, some entrances and exits, on-site toilet, etc., processing shed needs to be set.

在安裝和拆除水平保護裝置之前，需要進行技術交底。高空作業人員需經過技術培訓和考試，持證上崗。加工棚使用的鋼管、緊固件等材料需符合相關標準的要求。在架設和拆除臥式加工大棚時，操作人員的“三寶”需要齊全并正確使用。

Safety technical disclosure is required before installing and removing horizontal protection devices. Personnel working at heights shall undergo professional technical training and professional examination and work with certificates. Steel pipes, fasteners and other materials used in the processing shed shall meet the requirements of relevant standards. When erecting and dismantling the horizontal safe processing shed, the "three safety treasures" of the operators need to be complete and used correctly.

加工棚架設和拆除時，應避免上下同時作業，作業時間要錯開。搭建和拆除加工棚時，所有材料和工具應堆放在距建筑物外邊緣少2m的范圍內，堆放高度不應超過1m。拆下的材料需及時送到地面運走，嚴禁高空拋擲。

When erecting and dismantling the processing shed, simultaneous operation up and down shall be avoided, and the operation time shall be staggered. When building and dismantling the processing shed, all materials and tools shall be stacked at least 2m away from the outer edge of the building, and the stacking height shall not exceed 1m. The removed materials shall be transported to the ground in time, and it is strictly prohibited to throw them from high altitude.

建造和拆除加工棚時，應在地面設置警戒區，并派專人監控。建造和拆除加工棚時，應有專人指導。管理人員要保持眼睛、腿和嘴的勤勉，對危險情況采取有效的防護措施，確保人員。

When constructing and dismantling the processing shed, a warning area shall be set on the ground and a special person shall be assigned to monitor it. Special personnel shall be assigned to guide the construction and demolition of processing shed. Management personnel shall keep their eyes, legs and mouth diligent, and take effective safety protection measures for dangerous situations to ensure personnel safety.

陰雨大風天氣，應暫停木工加工棚的搭建和拆除，并檢查和維護加工棚的。加工大棚架設后，需經專職員驗收合格后方可投入使用。在豎立和拆除水平保護之前，需要進行技術交底。

In rainy and windy weather, the construction and demolition of woodworking shed shall be suspended, and the safety of processing shed shall be inspected and maintained. After the erection of the processing shed, it can be put into use only after passing the acceptance of the full-time safety officer. Before erecting and removing horizontal protection, safety technical disclosure is required.

木工加工棚讓工地防護作用更明顯便是以上相關內容了，當然如果您有需求的話可以隨時通過網站www.retraactit.com聯系到我們，我們制作以及出售加工棚等相關產品！

The woodworking shed makes the protection of the construction site more obvious. Of course, if you need it, you can go to www.retraactit.com at any time Com contact us, we specialize in making and selling processing shed and other related products!